GE PANAMETRICS
AQUATRANS
UTX 878
Loop-Powered Clamp-on Ultrasonic Flow Meter
Starting at $1,000.00
▼click for
sensor option▼ |
|
|
|
The GE
Panametrics AquaTrans UTX878 ultrasonic flow meter combines
the simplicity of a loop-powered flow meter installation with
proven, advanced clamp-on ultrasonic flow transmitter
technology. The Panametrics AquaTrans UTX878 provides
customers with an economical solution for flow measurement in
pipes up to 16 in (400 mm).
Loop Powered
Loop-powered measurement devices have increased in
popularity in the recent past because of the simplicity of
their installation. A single cable to the meter carries both
power to the meter and flow information back to the control
system. New low-powered ultrasonic transducer technology,
coupled with smart-microprocessor power management, allow the
AquaTrans UTX878 to function as a loop-powered meter.
Two-Channel Model
A second channel
is optional to ultrasonic flow meters from the GE Panametrics
AquaTrans UTX878 Series to provide the capability to measure
flow at a single point to obtain two-path averaging of the
flow measurement for increased accuracy.
Transit-Time Flow Measurement Technique
The Correlation Transit-Time™ technique uses a pair of
transducers with each transducer sending and receiving coded
ultrasonic signals through the fluid. When the fluid is
flowing, signal transit-time in the downstream direction is
shorter than in the upstream direction; the difference between
these transit-times is proportional to the flow velocity. The
AquaTrans UTX878 measures the time difference and uses
programmed pipe parameters to determine flow rate and
direction.
| |
|
Manufacturer: |
GE
Panametrics |
Quick Specs
-
Manufactured by
GE Panametrics
-
NIST Calibration available
-
Loop powered
-
Low power consumption
-
Suitable for pipe sizes from 1/2 inch to 16 inches (15 mm to 400
mm) diameter
-
Full external keypad
-
Large integral display
-
Simple meter and transducer installation and setup
-
Velocity, volumetric, and totalized flow
-
Economical non-intrusive flow measurement
Applications
The AquaTrans UTX878 is a loop-powered, full-featured
clamp-on ultrasonic flow transmitter system for a flow
measurement of:
Files and Links
|
PATHFINDER
INSTRUMENTS
Order or Shop On Line
.gif){kind=small}
.gif){kind=small}