|
PH / ORP /
DO CONTROLLERS - ANALYZERS
JENCO / CONTROLLER
/ 6308PT
Hysteresis - A
difference in output obtained from ascending and descending measurements.
|
 Download
Spec Sheet
Manual
|
FEATURES
Bright, Graphical LCD Display, 1.5 X 2.25
- Simultaneous Measurement And Analysis
- 1/4 DIN Watertight, IP65 Rated Enclosure
- Reversible & Isolated 4 To 20mA Output
With Adjustable Bandwidth - Continuous Controller / Relays Operation
During Calibration - 4-Digit Password Security Protection
- Programmable Set Point Hysteresis - Automatic Temperature Compensation
- CE Approved - Built In ISO9001 Certified Facility
- Membrane Keypad With Audio Feedback - Power Down, Non-Volatile Memory Backup
- RS-485 Output
- Multiple Spst On/Off Relays - Embedded Self Diagnostic Program
- High 50/60 Hz Noise Rejection.
1/4 DIN panel mount pH single parameter
analyzer with electrode efficiency display
function. Features pH linear or antilog
transmitter output, hysteresis control and
uninterrupted operation during pH calibration. Has one 4-20mA output, 5
relays and a RS-485 communications interface. Graphical display. 115/230V
AC. CE Approved
|
|
JENCO - 6308PT
|
Advance Single Parameter Analyzer-pH,
Temperature |
$499.00 |
|
ELECTRODE / ACCESSORY OPTIONS AVAILABLE |
|
PART# |
DESCRIPTION |
PRICE |
|
JENCO
1922757-020HT V18 |
FLAT TIP INDUSTRIAL IN-LINE pH/REFERENCE
DOUBLE JUNCTION ELECTRODE W/10K THERMISTOR ATC
AND SPADE LUG FOR pH(+) AND STRIPPED/TINNED
LEADS FOR ALL OTHER CONNECTIONS. RANGE 0 pH
TO 12 pH - W/ 20' CABLE |
$179.00 |
|
JENCO
1923737-020HTV18 |
SPHERICAL BULB WITH PROTECTIVE GUARD
INDUSTRIAL IN-LINE pH/REFERENCE DOUBLE
JUNCTION ELECTRODE W/10K THERMISTOR ATC AND
SPADE LUG FOR pH(+) AND STRIPPED/TINNED LEADS
FOR ALL OTHER CONNECTIONS. RANGE 0 Ph to
12pH - W/20'cable |
$179.00 |
|
JENCO -
600B-Y |
BNC TO 4MM SPADE LUG & TINNED PINS
ADAPTER/CONVERTER |
$ 18.00 |
|
ELECTRODE OPTION |
|
SENSOREX-S650CD |
pH ELECTRODE -
Cartridge Style, Flat Surface,
self cleaning |
$121.00 |
|
SENSOREX-S653/10 |
10 Foot Cable Assembly Standard Use, without ATC. |
$ 49.00 |
PRIMARY SPECS
| |
Range |
Resolution |
Accuracy |
|
pH |
-2.00 to 16.00 |
0.01 pH |
0.1% ± 1 lSD |
|
Temp. |
-10.0 to 120 °C
(14° TO 248° F) |
0.1 °C |
±0.3 °C |
PH
|
Temperature Compensation Range |
-10.0 to 120.0 °C
(14° TO 248° F) |
|
Buffer Recognition |
4.01, 7.00, 10.01 / 4.00, 6.86, 9.18
|
|
Buffer Temperature Range |
0 to 60.0 °C
|
|
Electrode Slope Compensation |
±30% of Ideal Slope
|
|
Electrode Offset Compensation |
±100 mV
|
|
Input Impedance |
Greater than 10 exp(13) Ohms
|
|
Calibration Auto End Point
Sensing |
Yes
|
OUTLET RELAYS
|
pH |
Temperature |
Control Type |
Relay Output (Resistive Load
Only) |
Relay Set Point Hysteresis |
|
2 programmable high or 2 low |
1 programmable high or 1 low
|
5 Amps at 115 VAC 2.5 Amps at 230
VAC |
On/Off
|
User Programmable
|
CURRENT OUTPUT
|
Type |
Range |
Accuracy |
Isolated Voltage |
Maximum Load |
|
Isolated 4 to 20 mA
|
Selectable Zero, & Span |
±0.02mA
|
500 VDC
|
500 W
|
GENERAL
|
ATC
Sensor |
Thermistor 10KiloOhms at 25 C
|
|
Security Protection |
4 digit password
|
|
Keypad |
Audio feedbackup
|
|
Communication |
RS-485
|
|
Pre-Amplifier Voltage |
±5 VDC,20mA Max Output
|
|
Power source |
115/230 VAC ,50/60Hz
|
|
Power source |
1/4 DIN ,Depth 148mm
|
|
Weight |
950 gm
|
|
PATHFINDER
INSTRUMENTS
Order or Shop On Line