JENCO PH & DO ANALYZERS

ELECTRODE / ACCESSORY OPTIONS AVAILABLE
PART#	DESCRIPTION	PRICE
JENCO 1922757-020HT	A flat Tip industrial in-line pH/Reference double junction electrode Spade Lug for pH (+) and stripped and Tinned Lead for pH Reference. Comes w/20ft. cable. Range 0 pH to 12 pH	$136.00
JENCO 1923737-020HT	A Spherical Bulb with protective guard industrial in-line pH/Reference double junction electrode spade Lug for pH (+) and Striped and Tinned Lead for pH Reference. Comes w/20ft cable. Range 0 pH to 12 pH	$136.00
JENCO - 600B-Y	BNC TO 4MM SPADE LUG & TINNED PINS ADAPTER/CONVERTER	$ 18.00
ELECTRODE OPTION
SENSOREX S650CD	pH ELECTRODE - Cartridge Style, Flat Surface, self cleaning	$121.00
SENSOREX S653/10	10 Foot Cable Assembly Standard Use, without ATC.	$ 49.00
DISSOLVED OXYGEN PROBES ( All require ordering accessory membrane Kit LD-900-3-DO)
JENCO LD-900-5-D0/10	Industrial Inline Epoxy Body D.O. Probe with 3/4 inch MNPT threads front and rear and a 10 foot long cable.	$295.00
JENCO LD-900-5-DO/30	Industrial Inline Epoxy Body D.O. Probe with 3/4 inch MNPT threads front and rear and a 30 foot long cable.	$335.00
JENCO LD-900-6-DO/10	Field Stainless Steel Weighted Industrial D.O. Probe with 3/4 inch MNPT threads only on the front with a waterproof 10 foot long submersible cable.	$295.00
JENCO LD-900-6-DO/30	Field Stainless Steel Weighted Industrial D.O. Probe with 3/4 inch MNPT threads only on the front with a waterproof 30 foot long submersible cable.(SPECIAL ORDER 8 -WEEKS)	$335.00
JENCO LD-900-3-DO	MEMBRANE KIT: Include 6 membrane caps, KCL Powder, KC1 Bottle and Sandpaper for cleaning Gold Cathode and Silver anode after soaking then in Ammonia solution. (THIS IS AN ESSENTIAL KIT AS ELECTRODES DOE NOT HAVE MEMEBRANES)	$ 48.00

	Features

	High 50/60 Hz Noise Rejection
	Power Down Memory Backup
	Auto Tempe. Compensation
	Bumpless Calibration
	RS-485 Output
	Membrane Switch With Audio Feedback
	Displays pH Electrode Efficiency
	Four User Programmable Relays For pH
	Simultaneous Analysis And Display For Measurement And Control
	pH/Temperature Measurement & Control
	Reversible And Isolated 4 To 20mA Output
	One Programmable Relay Output For Temperature
	Graphic LCD Display, 128 X 64 With Backlight
	Pipe, Wall Or Panel Mounting Watertight 1/4 DIN Enclosure
	Selectable Linear Or Anti-Logarithmic pH Output

	Specifications

Primary Specs
		Range	Resolution	Accuracy
	pH	-2.00 to 16.00	0.01pH	0.1% ± 1 LSD

	Dissolved Oxygen (ppm)	0.0 to 60.00 ppm	0.01 ppm	± 0.2% of span

	Dissolved Oxygen (% )	0 to 500.0%	0.1 %	± 0.2% of span

	Temp.		-10.0 to 120°C	0.1°C ± 0.1°C


pH
	pH Temperature Compensation Range	-10.0 to 120.0°C
	pH Buffer Recognition	4.01, 7.00, 10.01 / 4.00, 6.86, 9.18
	pH Buffer Temperature Range	0 to 60.0 °C
	pH Electrode Slope Compensation	±30% of Ideal Slope
	pH electrode Offset Compensation	±100 mV
	Input Impedance	Greater than 10 exp(13) Ohms
	Calibration Auto End Point Sensing	Yes
DO
	Salinity Compensation	0.0 to 40.0 ppt
	Pressure Compensation	600 to 1100mBar

Output Relays
	Relays numbers	One Programmable Relay for Temperature Two High
	Control type	On/off
	Relay output ( resistive load only )	5A at 115V or 2.5A at 230V
	Set point hysteresis	User programable

Current Output
	Current output	Isolated & Reversible 4 to 20mA
	Range	Selectable zero & span
	Accuracy	±0.02 mA
	Insulated voltage	500VAC
	Max load	500 Ohm
General
	ATC sensor	Thermistor , 10 K ohm at 25 C
	Security protection	4 digit password
	Dimension	1/4 DIN , depth 148 mm
	Weight	950 gm
	Power source	115/230 VAC ,50/60Hz
	Pre-Amplifier Voltage	±5 VDC,20mA Max Output
	Communication	RS-485
	Keypad	Audio feedbackup