$119.00

The CS-5000 is a flat surface high density graphite and CPVC conductivity electrode.  It is designed to be used in a pipe "T" and its conductive surface is even with the flow channel of the pipe so it doesn't impede the flow of the water being measured, or the fitting can be reversed for use as a submersion probe.  The electrode contains a temperature sensor that is used to perform temperature compensation over a range of 0 to 50 ˚C, The operating temperature of the electrode is 0 to 60˚ C, and it has a three wire, 10 foot cable attached.  Two wires connect to the measurement electrodes and a third wire connects to the temperature sensor.  The probe constant is 2.5.  The flat surface design keeps the electrode is self cleaning mode due to the turbulence across the surface. If it does get dirty, it is easily restored to its original condition by rubbing it on a flat surface using 400 grit sand paper and rinsing it clean, it is intended for use with the CT-1000 conductivity ranges up to 10,000uS.